Komatsu C93
Stronger, smarter and more profitable
Komatsu C93
A highly productive, all-around head for thinning that provides you with extra benefits through industry-leading experience and innovation. This is a good description of our new head, the Komatsu C93
Weight (dry weight)
From 995 kg (2,194 lb)
Height (incl. rotator)
1,543 mm (60.7”)
Fell/cut diam. theor. max
600 mm (23.6”)
Feed speed
0-5 m/s (0-16.4 ft/s)
Specifications
C93
Overview
Dimensions
Max width
1,410 mm (55.5”)
Height incl. rotator
1,530 mm (60.2”)
Height to vertical knife
1,370 mm (53.9”)
Opening knives
upper: 600 mm (23.6”)
Opening knives, upper
610 mm (24")
Opening knives, lower
345 mm (13.6")
Roller opening, max
550 mm (21.7”)
Specifications
Weight
Dry weight, incl rotator, from 995 kg (2,194 lb)
Feed speed
0-5 m/s (0-16.4 ft/s)
Gross feed force
Feed roller motor dependent: 22.5 kN (5,058 lbf) / 28.4 kN (6,385 lbf)
Feed wheel type
Steel rollers
Delimbing knives, number
4
Delimbing knives, opening
400 mm (15.7”)
Bar
75 cm (29.5”)
Saw motor
19 cm3/rev (1.16 cu in/rev)
Fell/Cut diam. theor. max
600 mm (23.6”)
Max hydraulic flow
Feed roller motor dependent: 250 l/min (67.4 gal/min) / 305 l/min (80.6 gal/min)
Max hydraulic pressure
28 MPa (4,061 psi)
Notes
General information
Standard and extra equipment are market-dependent and vary between countries. The specification describes possible equipment, not that which is standard or optional. Stated weights are based on standard equipment. Specifications and designs are subject to change without notice.
